(1) Solder ghost RX on FPV.Connect, antenna connector facing up;
(2) Connect solder jumper pads on bottom side of the FPV.Connect (solder jumper pads above ORQA logo on FPV.Connect, see attached image);
(3) Connect FPV.Connect antenna and ghost RX with small U.FL to U.FL cable (https://shop.orqafpv.com/collections/ghost-irc/products/fpv-connect-ghost-atto-u-fl-cable).
How to update ghost:
(1) Download ImmersionRC Ghost Updater v1.4;
(2) Start the update with the latest version.
How to bind JR with RX:
(1) With the latest version, go to "bind+setup" menu;
(2) Select Rx ID Goggles1;
(3) Bind + update.
New features:
- Turning Ghost On/Off
- VTX mode with Off and Automatic options
Off mode turns off all VTX related Orqa-Ghost options/features.
Automatic mode will sync JR frequency with FPV.One, so when you change the band/channel on JR module, it will be synced with RapidFire on your goggles.
If you change channel/band on RapidFire, it will not change channel/band on your JR.
