Brand new goggles that were delivered a couple of hours ago and have yet to be flown.
They cam with 1.1.5 and the image looked great, with zero noise. I updated to 1.2.0 and noise is now being injected into the video stream. Attached is an image from bench DVR. This noise is present with the without a VRx module in the goggles.
Updating to 1.2.2 does not remove the noise. And unfortunately I can not roll back to 1.1.4 to test if that will remove it.
With the same quad and VRx on FW 1.1.5 the image was fine. Using the same quad and VRx in HDOs the image is fine.
So the noise is not from the quad or VRx.
Jye
said
over 4 years ago
Coming back to the goggle after a couple of hours and allowing them
to cool, I can confirm it is the fan turning on automatically at low
speed. Here is DVR (with audio) demonstrating the issue.
Jye
Hi Everyone,
Brand new goggles that were delivered a couple of hours ago and have yet to be flown.
They cam with 1.1.5 and the image looked great, with zero noise. I updated to 1.2.0 and noise is now being injected into the video stream. Attached is an image from bench DVR. This noise is present with the without a VRx module in the goggles.
Updating to 1.2.2 does not remove the noise. And unfortunately I can not roll back to 1.1.4 to test if that will remove it.
Has this been seen before?
In its current start they aren't flyable :(
Cheers
Jye